2. Door sensor
Door sensors are used for detecting the status of open and close of
windows and doors. It will detect it and send the signal to main panel.
1.
Tear apart the double-side adhesive tape on the magnet and the
transmitter. Then adhere them to the appropriate position.
2.
Magnet should be near to the side of transmitter with indicator.
The two should align with each other and the distance should not
exceed 10mm.
3.
Please plug out the antenna
for better signal.
4.
If the low-power indicator is on,
please change the battery.
3. Wireless PIR detector
PIR detectors are used to detect the movement within a certain range.
Fix the adjustment bracket on the wall with the provided screws
and attach the detector to the bracket. It is recommended to
mount it at a height of 2-2.2m above the floor.
Effect of the PIR detection is best when the detection direction is
in 90°angle with the walking direction of the intruder. Choose the
most suitable installation place and angle according to actual
situation and taking the following installation diagram as reference
to ensure the detection effect is best.
Please do not fix it under direct sunlight or other strong lights and
also keep it away from places with frequent strong air stream.
If the low-power indicator is on, please change the battery.
