background image

No Diving or Jumping.  Observe all Safety Rules

5-5

POOL MAINTENANCE

SPRINGTIME CLEANING OF YOUR POOL

Section

5

PREPARING YOUR POOL IN THE SPRING

 

At the end of winter, allow the ice in the pool to thaw completely. When the temperature 
reaches approximately 10 °C (50 °F), you have to restart your filtration system, since 
algae and bacterial form more quickly as it gets warmer. Here is how to prepare 
your pool in a few simple easy steps.

a.  If your pool is equipped with a pool cover, remove the cover and 

cushion. Carefully remove with a hose any rainwater that has 
accumulated on the cover so it does not fall into your pool. 
Clean your cover and cushion and let them dry. Store 
them in a dry clean place.

 

b.  Attach the return inlet and skimmer to the filter. Bring 

the water level up to the middle of the skimmer. Get 
your filter working. Clean the bottom of the pool with 
the vacuum, taking care to place the filter in the 
“waste/drain” position. In this way you will eliminate 
particles of dirt without disturbing the sand in the 
filter, and will considerably reduce the need for 
“backwash rinsing” of the filter.

c.  Now that you have purified the water, you have 

to test it. It is very important that the pH level of 
your pool be between 7.6 and 7.8 and the pool’s 
alkaline content be between 80 ppm and 130 ppm. 
If you are unable to attain these levels, please 
contact your retailer who will gladly do these 
tests for you.

Important Note:
Do not drain your pool to clean the water unless absolutely necessary (the water 
is recyclable). If you do empty your pool, don’t leave it empty for too long or 
expose it to direct sunlight, as the liner may shrink.

Summary of Contents for V35018







































































































Reviews: