Piranha PII-140, Instructions And Repair Parts

Page: 5 / 44

Introduction
The Piranha Ironworker is a compact hydraulic powered unit that provides you several
important advantages surpassing most other ironworkers in today's market, and offering,
for your shop, a one stop ironworking center. It shears, punches, bends, notches, and
copes; all in a low silhouette, efficiently designed unit resulting in minimal floor space
requirements. The integral lifting lug provides instant portability and the unit arrives fully
assembled at your shop requiring only the addition of hydraulic oil and a power source to
become fully operational. The large platen has eighteen 5/8 - 11 tapped holes giving a
wide base for increased flexibility of attachment sizes. The shearing operation features an
adjustable automatic hold down allowing the operator to clamp the work piece with a
slight initial adjustment All workstations are located approximately 44" off the floor for
ease of operation.
The first part of this manual provides maintenance instructions including an introduction,
dimension and function drawings, lubrication instructions and a section on trouble
shooting various problems which may occur. The second part of this manual provides
repair parts information and a complete list of parts and their respective part numbers.
Proper understanding and application of the information and procedures given in this
manual will aid in establishing a preventative maintenance program and provide
assistance for correcting malfunctions that may occur in the machine. The repair parts list
provides information for parts procurement and assembly breakdowns to aid in
disassembly and assembly for repair part installation.
5