Piranha PII-140, Instructions And Repair Parts

Page: 3 / 44

Safety Precautions
The operator of this machine should thoroughly understand this manual before starting
any operation.
Wear eye protection at all times.
Use the proper voltage outlet for your machine.
Assure that all guards and cover shields are down before starting machine. CAUTION: Do
not remove guards.
Keep hands off working tables and out of path of moving parts during operation.
Remove all material from the tables except what you are using.
Remove all tooling from punch end before starting shearing or coping operations.
Assure all tooling is properly held in position before starting any operation.
The area around the machine should be well lighted, dry, and as free as possible from
obstructions.
All maintenance and repair work should be performed by a person familiar with this
publication.
At the end of the working day, the operator should turn the power off to the machine.
Set punched stroke controls to allow ¼
” maximum clearance between bottom of stripper
foot or bending punch and top of the material. Contact the factory for proper stroke
adjustments on special tooling.
Turn the machine OFF when changing tooling or performing maintenance work.
3