Piranha Ironworker P90
7
Safety Precautions
The operator of this machine should view the operational video provided with the
machine, and thoroughly understand this manual before starting any operation.
This machine was designed for use by a single operator only.
Wear eye protection at all times.
Use the proper voltage outlet for your machine.
Make sure that all guards and cover shields are down before starting machine.
CAUTION
: Do not remove guards.
Keep hands off working tables and out of the path of moving parts during operation.
Remove all material from the tables except for the work piece.
Remove all tooling from the punch end before starting shearing or coping operations.
Make sure that all tooling is properly held in position before starting any operation.
The area around the machine should be well lit, dry, and free from obstructions.
All maintenance and repair work should be performed by a person familiar with this
publication.
At the end of the working day, power off the machine.
Adjust limit switches when punching or bending to allow 1/4" maximum clearance
between bottom of the stripper foot or bending punch and the top of the material. Contact
the factory for limit switch adjustments on special tooling.
Turn selector switch to the "OFF" position when changing tooling or performing
maintenance work (Reference page 13, figure B).
Summary of Contents for IRONWORKER P90
