OPERATION METHOD
1. Before using the vacuum cleaner unwind the length of power cord required
and insert the plug into the power socket.
A YELLOW mark on the power
cord indicates the ideal cable length. Do no extend the power cord beyond
the RED mark.
2. Press the On/Off Switch Pedal to switch the vacuum cleaner ON. Press this
switch again to turn the vacuum OFF.
3. You can adjust the Suction by sliding the
Air Intake control on the curved handle.
The suction will be reduced the more you
open the slide. For maximum suction
keep the slide close.
4.
Choose a suitable suction according to
the surface to be cleaned:
For Carpets - you will need Maximum
suction
For Hard Floors - you will need Maximum to Medium suction.
For Curtains or Sofas – you will need Medium to Minimum suction.
5.
Using the Adjustable Floor Brush:
For Carpets – The bristles should be in (retracted) to enable the floor head
to glide on the carpet while cleaning.
For Hard Floors – The bristles should be out (extended). You will need to
press the switch on the floor brush down to get the bristles out. The bristles
will collect the dirt and protect the hard floors surface from scratches.
Using the Cleaning Accessories
•
Dual Position Carpet / Floor Brush
Position 1: Bristles extended For hard floors Position 2: Bristles retracted For carpets
•
Brush and Nozzle tool
Piranha Quick comes with one accessory tool which is a crevice tool and a
brush tool.
