background image

INTRODUCTION

Congratulations! You have just purchased one of the finest pieces of equipment on the 
market today. Before installing or operating your new Piper equipment, you should read 
through this manual. This manual should be retained for further reference as it contains 
installation and operating instructions, service tips, parts list and warranty information.

For your safety, read and follow all cautions and warnings.

FREIGHT DAMAGE CLAIMS

Your Piper equipment was carefully inspected and packed before leaving our factory. The 
transportation company assumes full responsibility for safe delivery of this equipment. 
Piper Products cannot assume responsibilities for damage or loss incurred in transit. 
Visible damage or loss should be noted on the freight bill and signed by the person 
making the delivery.

A freight claim should be filed immediately with the transportation company. If damage is 
unnoticed or concealed until equipment is unpacked, notify the transportation company 
immediately and tell them you want to file a concealed damage claim. This must be done 
within five (5) days after delivery was made. Be sure to retain all packing material and 
cartons.

WARNING

Installation of this equipment should be done only by persons qualified or licensed 
to install electrical equipment.  All electrical and plumbing must meet local, state, 
and federal codes.

Plumbing installation must be performed by a qualified plumber.

Adjustments and service work should be performed only by a qualified service 
technician. Service is available through Authorized Piper Parts and Service 
Distributors throughout the United States. For a complete listing of these call or 
write Piper Products, Inc. for the name of the nearest distributor.

This equipment is intended for commercial use only. Not for household use.
Use of other than genuine Piper replacement parts or service work performed by 
other than an authorized Piper service agent will void the warranty.

Do not use any corrosive cleaners. Piper only approves soap and water for 
cleaning stainless steel.

2

Summary of Contents for 11QT-D-T-R-120

















Reviews: