12
Témoin d'alimentation
0
(Alimenté par la batterie) Le témoin s'allume en vert lorsque l'appareil est
mis sous tension. Il devient rouge lorsque la charge résiduelle de la batterie
s'affaiblit. Il s'éteint lorsque l'appareil est mis en veille.
0
(En charge) Le témoin clignote en rouge (si la charge de la batterie est
faible) ou en vert, peu importe que l'appareil soit en marche ou en veille. Le
témoin devient vert lorsque la charge est terminée.
0
Lorsque la batterie est déchargée, le témoin clignote alternativement en
rouge et vert.
Jumelage
0
Le mode d'appairage prend environ 5 minutes.
0
Cet appareil peut contenir les données de jusqu'à huit périphériques
jumelés. Les informations du plus ancien périphérique connecté sont
supprimées lorsque vous essayez d'appairer un neuvième périphérique. La
procédure à suivre pour appairer d'autres périphériques est la même que
celle du premier appairage.
0
Toutes les informations d'appairage sont supprimées si vous appuyez sur la
touche
pendant 10 secondes ou plus. Pour appairer une nouvelle fois un
dispositif, supprimez d'abord les informations d'appairage de l'appareil sur le
périphérique compatible
Bluetooth
.
Lecture
0
Si le réglage du volume du périphérique compatible
Bluetooth
est bas, le son
ne sera pas reproduit par cet appareil, donc réglez le volume à un niveau
correct.
0
Si l'appareil ne reçoit aucun signal d'entrée pendant 20 minutes, il passe
automatiquement en veille (fonctionnalité de veille automatique). De même,
s'il n'y a aucune connexion
Bluetooth
établie avec l'appareil pendant
5 minutes, il passe automatiquement en veille.
0
Si vous lisez à un volume proche du maximum et que la batterie s'affaiblit, le
volume baisse automatiquement.
0
À cause des caractéristiques de la technologie sans fil
Bluetooth
, le son
produit par cet appareil peut être légèrement en retard par rapport au son lu
par le périphérique compatible
Bluetooth
.
Instructions avancées
Français
XW-BTSP70.book 12 ページ 2015年6月29日 月曜日 午前11時33分