Pioneer XV-BD122B, Service Manual

Page: 19 / 85

19
XV-BD422B
5 6 7 8
5 6 7 8
A
B
C
D
E
F
3-3. Simple Aging
[ Content of Test ]
Performs random playback of disc randomly. Implement the following process 800 cycles.
[ Instructions ]
1
Select "[7] Enter SP Mode" with the
b
key from the Service Mode screen, and press the [ENTER] key.
2
The SP Mode window menu will be displayed, so select "Simple Aging" and press the [ENTER] key.
3
The tray will automatically open and the dedicated screen will appear. Place the disc you wish to use on the tray,
and push it in manually. ([Close] key will not function)
4
The tray will reopen automatically. Aging will start when you push the tray in manually.
Note 1: [Total test count] display should always be 1 (essentially, 9C40, which is the hex of the 40000, the total of
Random 50-time playback x 800 times should be displayed.
Note 2: Accumulated sum for [Current test count] is counted up until "9C3D" (39997 in decimal), however later it is
expressed as "32" and is finished.
Note 3: DVD and BD disc can be checked with Single Layer (SL) disc only.
If they are checked with Dual Layer (DL) disc, an Error is generated.
Note 4: Set [Auto Power OFF] function in the setting of main unit to [OFF].
If the function is executed in any setting status, the power supply is turned OFF at the time.
.
Error List
The following serves as the Error List generated in SP Mode.
.
Tray close
l
.
50 times of short playback on voluntary points
.
Tray open
1cycle BD : 75 seconds x 800 times = Completed in a total of approx. 16 hours 40 minutes
DVD: Approx. 100 seconds x800 times = Completed in a total of approx. 22 hours 12 minutes
CD : Approx. 105 seconds x800 times = Completed in a total of approx. 23 hours 20 minutes
l
Error code Error name Discription
12 PWR_CURVE_ERROR Power curve chk-sum error
22 STARTUP_TIMEOUT_ERROR Over time-out criteria
23 MEDIA_MISMATCH Wrong disc
25 DISCID_ERROR 0x25 Disc ID error
26 MEDIUM_SUPPORT_ERROR Unsupported disc
31 TRAYOUT_ERROR Over tray-out time-out criteria
32 TRAYIN_ERROR Over tray-in time-out criteria
33 FLASH_UPDATE_ERROR Updating FA result failed
36 OPU_TEMP_ERROR Abnormal OPU temperature
41 SEEK_TIMEOUT_ERROR Over seek time-out criteria
42 SEEK_CMD_FAIL_ERROR Seek cmd failed
51 READ_TOC_ERROR Read TOC cmd failed
52 TOC_TIMEOUT_ERROR Over read TOC time-out criteria
61 PIPO_TIMEOUT_ERROR Over time-out criteria
62 PIPO_C1C2_ERROR Read PIPO cmd failed
63 PIPO_C1C2_OVER Over PIPO criteria
71 RD_CMD_FAIL_ERROR Read cmd failed
72 RD_CMD_ERROR Cmd error or illegal mode
73 RD_TIME_OUT_ERROR Over read cmd time-out criteria
81 CHECK_FA_TABLE_ERROR FA table chk-sum error