80
XDV-P9
Error code
Mode (A)
Major classification
Detailed code
Type
Contents
Details and cause
ERROR_CODE_READ
Error2
93
FOK Error
Mechanism error code F8 0013
ERROR_CODE_READ
Error2
94
Electricity
ID/SUBCODE Error
Subcode cannot be read
→
Spindle is faulty and disc scratches, dirt and vibration
are strong.
ERROR_CODE_READ
Error2
95
Mechanism
Spindle High Revolution Error
Mechanism error code F8 0015
ERROR_CODE_READ
Error2
96
Mechanism
Spindle Low Revolution Error
Mechanism error code F8 0016
ERROR_CODE_VDNG
Error6
97
Electricity
Mechanism Unit Reference Voltage Error
Elevation positioning is disabled
→
Power fault and control volume resistor is faulty.
98
Electricity
TOC Error
Mechanism error code FA XXXX
B0
Electricity
Mechanism controller Communication
Communication is disabled between mechanism
Error
controller and system controller.
→
Wiring is disconnected and short-circuited on main unit.
B1
Electricity
Mechanism controller Communication
Mechanism controller does not respond.
Timeout
→
Wiring is disconnected and short-circuited on main unit.
B2
Electricity
Unexpected Error in Mechanism
Controller Communication
B3
Electricity
Communication Error between BUS
No communication is done from BUS microcomputer.
Microcomputer and System Controller
→
Wiring between main unit and extension unit is
disconnected and short-circuited.
CANNOT_BE_PLAYED
←
A0
Electricity
Region Code Error
DVD disc having region code which cannot be played
back
ERROR_CODE_READ
A1
Electricity
Digital Copy Guard Error
DVD disc violated against digital copy guard
ERROR_CODE_READ
A2
Electricity
DVD File System Read Error
DVD data read error
→
Defective carriage/tracking and disc scratches
ERROR_CODE_READ
A3
Electricity
DVD Search Timeout Error
Target address could not be reached.
→
Defective carriage/tracking and disc scratches
ERROR_CODE_READ
A4
Electricity
CD-ROM Read Error
Disc data cannot be read
→
Spindle is faulty and disc scratches, dirt and vibration
are strong.
C0
Electricity
System Controller
Communication is disabled between system controller
Communication Error
and BUS microcomputer.
→
Wiring between main unit and extension unit is
disconnected and short-circuited.
Thermal Protection
C1
Electricity
Low Temperature Detection
Equipment temperature is lower than operable
... temperature.
ERROR_CODE_VDNG
Error-06
C4
Electricity
Power Supply Fault
Higher or lower than specified voltage in 9 V-system
power supply, otherwise no power is issued.
→
Defective switching transistor and power supply fault
Summary of Contents for XDV-P9
