Status of disc and
holder
Indicator
A disc can be loaded to
the holder.
Flashes in red.
A disc is being loaded to
the holder.
Flashes in red.
A disc is loaded to the
holder.
Lights in blue.
A disc is loaded to the
holder and the disc is se-
lected.
Lights in red.
The discs are being ex-
changed.
Flashes in red.
The disc is being ejected.
Flashes in red.
#
If the holder has already loaded a disc, you
need to eject the disc first. For details concerning
about ejecting a disc, refer to
Ejecting a disc
on
this page.
2
Insert a disc into the disc loading slot.
The disc is loaded into the selected holder and
the indicator corresponding to the holder
lights in red.
Repeat these steps until you have done load-
ing discs into this unit.
#
When the automatic playback function is on,
this unit will cancel the DVD menu and automati-
cally start playback from the first chapter of the
first title. Refer to
Automatic playback of DVDs
on
page 20.
Notes
!
The DVD player plays one, standard 12-cm
disc at a time. Playing back an 8-cm disc is
not possible with this unit. Playable disc and
adapter are listed in the table below.
12-cm disc
8-cm disc
8-cm disc adapter
Ö
—
—
!
Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on
Playable discs
on
page 5.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
h
to eject the disc, and check the disc
for damage before inserting it again.
!
If an error message such as
ERROR-02
is dis-
played, refer to
Error messages
on page 46.
!
If bookmark function is on, DVD playback re-
sumes from the selected point. For more de-
tails, refer to
Resume playback (Bookmark)
on
page 18.
!
This unit does not automatically change discs
even if it reaches to the end of the currently
playing disc. To change discs, press one of the
1
–
6
buttons on the DVD player or
a
/
b
(
DISC
).
Ejecting a disc
You can specify a holder that you eject a disc
from.
1
Press one of the 1
–
6 buttons on the
DVD player to select the holder you want
to eject the disc from.
Each of the disc holders has corresponding in-
dicator. About the indicator status, refer to
Loading a disc
on the previous page.
2
Press
h
to eject a disc.
The disc is ejected.
#
You can eject all loaded discs at once. To do
this, press and hold
h
.
To cancel the ejecting, press
h
.
Basic Operations
En
16
Section
05
