24
XDJ-R1
1
2
3
4
A
B
C
D
E
F
1
2
3
4
•
W
hen the TEMPO slider is moved far down to the [+] side during the button and function checking mode, the mode is
switched to the JOG dial load measurement mode to show the Max speed and time in the dot matrix.
•
W
hen the JOG dial is swiftly rotated, the figures are displayed. The jog dial can be rotated either clockwise or counterclockwise.
• For example, when "
8
.6: 115" is shown on the display, which indicates as follows:
X
8
.6: Maximum speed (X1 is defined as 1.
8
second required for one revolution.)
115: Time (msec) required to lower the revolution speed from X3 to X1.5
• In order to measure the time to lower the rotation speed, the maximum speed of the jog wheel should be X7.0 or more.
•
W
hen time is measured several times in a row, up to the fourth largest msec among the several times of measurement other
than the first one is averaged.
•
W
hen the unit is powered on while the TIME and HOT CUE A buttons of DECK 1 are pressed simultaneously, this mode
starts after the "TEST MODE" is displayed in the dot display area.
• This mode is comprised of the following 2 modes:
CD drive performance mode
• Mode to measure servo's basic actions such as set up, play, pause and track search and error rate.
• Before the CD drive diagnostic mode starts, this mode is first displayed.
Test performance mode
• This mode can precisely control servo's actions step by step.
* Commands in this diagnostic mode are for testing mainly the mechanism and servo systems but not for testing
the DJ functions, such as SCA
N
and TEMPO.
Commands of the CD drive performance mode
Play (trace) / Pause (
d
/
e
(PLAY/PAUSE))
• If the CD drive is in stopped state, it is set up to start playback.
•
W
hen a track is playing, each time the button is pressed, the track is alternately paused and played.
• The current playing address is displayed in the time display.
Track Search F/R (TRACK SEARCH
o
,
p
)
• A track displayed is searched clockwise or counterclockwise and paused.
Eject (DISC
h
)
• A Disc is ejected.
Mode Change (MASTER TEMPO)
•
W
hen the MASTER TEMPO button is pressed in the CD drive performance mode, the MASTER TEMPO's LED lights up
and shifted to Test performance mode.
3. JOG dial load measurement mode
4. CD drive diagnostic mode
Max speed
0. 0 :
0ms
Time (msec)
Buttons on the unit
Function
d
/
e
(PLAY/PAUSE)
TRACK SEARCH
o
,
p
DISC
h
MASTER TEMP
<CD drive performance mode>
Play (trace) / Pause
Track Search F/R
Eject
Mode Change
Buttons on the unit
Function
I
N
FO (UTILITY)
TEMPO
BEAT FX (TRA
N
S)
BEAT FX (FLA
N
GER)
BEAT FX (ECHO)
TRACK SEARCH
p
TRACK SEARCH
o
BEAT FX (ROLL)
MASTER TEMPO
<Test performance mode>
Servo All Off (Stop)
LD On/Off
Focus On
Spindle Kick, Tracking On/Off
Tracking Off
Slide F
W
D (2 mm)
Slide RE
V
(2 mm)
Pickup Up/Down
Mode Change
