Pioneer X-SMC01-K, Operating Instructions Manual

Page: 28 / 39

Bluetooth
® Audio playback
28
En
10
• Please refer to the user’s manual for your Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
• When PIN code entry is requested, enter “
0000
”. (This
unit does not accept any PIN code setting other than
“
0000
”.)
4 Confirm on the
Bluetooth
capable device
that pairing has been completed.
If pairing with the Bluetooth capable device has been
completed correctly, the name of the Bluetooth capable
device will be displayed on the front panel of the unit. (Only
single-byte alphanumeric characters can be displayed. Any
character that cannot be displayed will be indicated by a “*”.)
Listen to music on the unit from a
Bluetooth capable device
1 Press the BT AUDIO.
The unit will switch to
BT AUDIO
input.
2 A
Bluetooth
connection will be created
between the
Bluetooth
capable device and the
unit.
Procedures for connecting to the unit should be performed
from the Bluetooth capable device.
• Please refer to the user’s manual for your Bluetooth
capable device for details of the connection procedures.
3 Playback music from the
Bluetooth
capable
device.
Note
• When Bluetooth capable devise is not playing and no
operations have been performed for more than 20
minutes, the unit will automatically power off.
• Auto power off can be switched to
ON
/
OFF
(page 35).
BT STANDBY
The following can be done when the unit is on standby with
the
BT AUDIO
switched
ON
.
By selecting a Bluetooth capable device that already has a
connection history (pairing has already been conducted) with
this unit, this unit will automatically turn on with the
BT
AUDIO
function.
BT STANDBY settings
Switch
ON
/
OFF
by long pressing the
BT AUDIO
button
located on the top of the unit for 3 seconds.
The setting operation can only be performed by using the
BT
AUDIO
button on the unit. The setting cannot be performed
using the remote control.
Note
• When the
BT STANDBY
is
ON
,
“BT STANDBY ON” is
displayed on the main display.
• When the
BT STANDBY
is
OFF
,
“BT STANDBY OFF” is
displayed on the main display.
Connection while in BT STANDBY mode with
Bluetooth
capable device
When connection history (pairing has already been
conducted) with a Bluetooth capable device exists for the unit
during
BT STANDBY
, the unit can receive a connection
request directly from the connection history.
The unit will start using the
BT AUDIO
function, and connect
with a Bluetooth capable device.
Even devices that have already been paired with this unit will
not connect during
BT STANDBY
in the following cases.
In such cases, delete pairing history from the Bluetooth
wireless technology device and perform pairing again.
• Up to 8 pairing history can be recorded with this unit. If
connecting to a Bluetooth wireless technology device
over 8 units, the oldest pairing history will be deleted.
• If the settings are reset to the factory setting, all pairing
history will be deleted.