26
X-HM81-K
1
2
3
4
A
B
C
D
E
F
1
2
3
4
Make preparations on the wireless LAN router side then check that the SSID for that router is displayed, following the
procedure shown below. If the SSID is displayed on the LCD, the Wi-Fi antenna works properly.
If the SSID is not displayed, check the wireless LAN antenna, CR870 (Bco Module), and the cable that connects them.
(In the following LCD-display examples, the language setting is English.)
2. Checking the Wi-Fi Antenna
Start the Web browser, input http://192.168.0.1 as a URL. If the screen as indicated below is displayed,
the LAN terminal works properly.
If this screen is displayed,
the LAN terminal works properly.
If the SSID for the prepared router is displayed on the list,
the Wi-Fi antenna works properly.
Note:
As the SSID name for a wireless LAN router supports only
one-byte alphanumerics, if two-byte characters are used in
an SSID name, rename it.
1. Select the NETWORK function then press SETUP.
2. Select Network Setting
→
Network Configuration.
3. Select Wireless.
4. Select Auto.
5. SSID list is displayed.
