manualshive.com logo in svg

Pioneer X-HM71-K, Service Manual, Page: 17 / 110

Share
Download
Pioneer X-HM71-K Service Manual Download Page 17

17

X-HM81-K

5

6

7

8

5

6

7

8

A

B

C

D

E

F

• No Sound

(*1) The confirmation that is in a state of each sound source

Check the state of each sound source. (*1)

Yes

No

A sound does not come out 
of FRONT SP

The sound from a source of CD, 
USB, TUNER, iPod, LINE, F.AUX 
does not come out.

• Check the IC602 and its peripheral circuits. (MAIN Assy)
• Check the MAIN MUTE circuit.

No

[Failure in the individual analog-signal paths]
• Check each input circuit part and each Assy.
• Failure in connection for volume IC (IC603).
• Check the IC603 and its peripheral circuits.

No

Yes -> Check the BCO system audio.
          (USB/iPod/Ethernet/WIFI/BT)

• Check the IC208 and its peripheral circuits. (CNT2 Assy)
• Check the digital audio path between the CR870 (MODULE on BCO 
  Assy) and  IC208.
• Replace the CR870 (MODULE on BCO Assy).

None of the audio of BCO system 
outputs it.

• Check the input blocks and its peripheral circuits and power 
 supply 

voltages.

• Replace the CR870 (MODULE on BCO Assy).

Output it depending on input

• Check the speaker realy. (MAIN Assy)

Yes

Does

a signal output it from 

OP-AMP IC (IC602) 

pin 1, 7?

• Check the IC608, IC612 and its peripheral circuits. (MAIN Assy)
• Check the Q621, Q623, Q640, Q641 and its peripheral circuits.
   (MAIN Assy)

No

Yes

Does

a signal output it from 

AMP IC (IC608, 612) 

pin 13?

Does

the sound of CD, Analog

AUX, TUNER, LINE come

out?

Does

a signal output it from 

DAC IC (IC208) pin 10,

11?

Check the IC315 and its peripheral circuits. (POWER Assy)

No

MAIN UCOM

Yes

Check the IC601 and its peripheral circuits. (MAIN Assy)

Is the

output voltage of the regulator

 IC (IC315) for microcomputer power 

supply 3.9 V?

• Check the D600. (MAIN Assy)
• Check connection between each Assy.

No

Yes

Is 3.3V supplied to 

MAIN UCOM (IC601)?

Check the XTAL600 and its peripheral circuits. (MAIN Assy)

No

Yes

Does

the oscillator (XTAL600) for

MAIN UCOM (IC601) oscillate

 it?

(POWER Assy)

(MAIN Assy)

(MAIN Assy)

(MAIN Assy)

(MAIN Assy)

(MAIN Assy)

(CNT2 Assy)

Does

the audio signal appear to 

coupling condenser arround

volume IC (IC603)?

Summary of Contents for X-HM71-K















































































































Reviews:

No comments