manualshive.com logo in svg

Pioneer X-HM71-K, Service Manual

Share
Download
Pioneer X-HM71-K Service Manual Download Page 24

24

X-HM81-K

1

2

3

4

A

B

C

D

E

F

1

2

3

4

5.3  POWER MANAGEMENT

The power supply state transition of this unit becomes the right figure. 

Cold Standby: 
Mode in which power consumption becomes lowest
Only the main microcomputer among all the microcomputers 
is powered.

Power On: 
Mode in which AC Relay is turned ON and all microcomputers 
are powered

iPod Charge: 
Mode in which an iPod is inserted in its dock in modes other 
than Power On
In this mode, an iPod device that is plugged into the USB 
terminal or the dock can be charged. 
The power-supply status is the same as that during 
power-on with an HP inserted. 

Network Standby: 
Mode in which the LCD is unlit with Bco powered in order to 
save startup time of Bco
The audio and video output signals are muted, and the keys 
and buttons other than the STANDBY/ON key are masked. 
Basically, this mode is the same as iPod Charge mode.

Note: The power-off status caused by activation of a protection circuit is not described in this section. See "5.2 Protection circuit."

Cold

Standby

Network
Standby

PowerOn

iPod

Charge

4

1

2

6

5

7

8

3

9

No.

Shifting

Factor

1

ColdStandby -> Power On

STANDBY/ON on the unit
STANDBY/ON on the remote control unit
WakeUpStart

2

Power On -> ColdStandby

STANDBY/ON on the unit
STANDBY/ON on the remote control unit
Sleep
AutoPowerOff
WakeUpEnd
FactoryReset

3

iPodCharge -> ColdStandby

Dock removed

4

ColdStandby -> iPodCharge

Dock inserted

5

Power On -> NetworkStandby

NetworkStandby on the remote control unit
ControlAppPowerOff

6

NetworkStandy -> Power On

STANDBY/ON on the unit
STANDBY/ON on the remote control unit
WakeUpStart
ControlAppPowerOn
Air Play started
DMR started

7

iPodCharge -> Power On

STANDBY/ON on the unit
STANDBY/ON on the remote control unit
WakeUpStart
ControlAppPowerOn
Air Play started
DMR started

8

Power On -> iPodCharge

STANDBY/ON on the unit
STANDBY/ON on the remote control unit
Sleep
AutoPowerOff

9

Returning to Network Standby

Removal/insert of the dock

Summary of Contents for X-HM71-K















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands