Using the tuner
06
37
En
3
Press ST
/
to select the program type you want
to hear.
4
Press ENTER to search for the program type.
The system starts searching through the station presets
for a match. When it finds one, the search stops and the
station plays for five seconds.
5
If you want to keep listening to the station, press
ENTER within the five seconds.
If you don’t press
ENTER
, searching resumes.
If
NO PTY
is displayed it means the tuner couldn’t find
that program type at the time of the search.
1
Displaying RDS information
Use the
DISPLAY
button to display the different types of
RDS information available.
2
•
Press DISPLAY for RDS information.
Each press changes the display as follows:
• Radio Text (
RT
) – Messages sent by the radio station.
For example, a talk radio station may provide a phone
number as RT.
• Program Service Name (
PS
) – The name of the radio
station.
• Program Type (
PTY
) – This indicates the kind of
program currently being broadcast.
• Current tuner frequency.
Using EON
When EON (Enhanced Other Network information) is
turned on, the receiver jumps to an EON-linked
broadcast when it begins, even if a receiver function
other than the tuner is being used. It can’t be used in
areas that EON information isn’t transmitted and when
FM broadcast stations don’t transmit PTY data. When the
broadcast ends, the tuner returns to the original
frequency or function.
1
Press FM/AM to select the FM band.
3
2
Press EON to select one of the possible modes.
Press repeatedly to switch between:
•
EON TA
(Traffic Announcement) – Sets the tuner to
pick up traffic information when it is broadcast.
•
EON NEWS
– Sets the tuner to pick up news when it
is broadcast.
•
OFF
– Switches off the EON feature.
When set to
TA
or
NEWS
, the
EON
indicator in the
display lights (it flashes when receiving an EON
broadcast).
4
The indicator in the display lights when
the current station carries the EON service.
5
Note
1 RDS searches station presets only. If no stations have been preset, or if the program type could not be found among the station presets
NO PTY
is
displayed.
FINISH
means the search is complete.
2 • If any noise is picked up while displaying the RT scroll, some characters may be displayed incorrectly.
• If you see
NO RADIO TEXT DATA
in the RT display, it means no RT data is sent from the broadcast station. The display will automatically switch to the
PS data display (if no PS data, the frequency is displayed).
• In the PTY display,
NO DATA
or
NO TYPE
may be shown. In this case, the PS display is shown after a few seconds.
3 EON is only possible in the FM band.
4 You can’t search for traffic announcements and news at the same time.
5 • You cannot operate the
T.EDIT
and
PTY SEARCH
buttons while the
EON
indicator in the display is lit.
• If you want to change to a function other than the tuner when the
EON
indicator is flashing, press
EON
to turn EON off.
DVR 1
DVR 2
CD
CD-R
DIMMER
FM/AM
1
2
3
SLEEP
MCACC
INPUT
SELECT
GENRE
4
5
6
iPod USB
FM/AM
DIRECT
THX
STATUS
PHASE
TV CTRL
HDD
A.L.C.
DVD
STANDARD ADV SURR
DTV/TV
AUDIO
DISPLAY
EON
MPX
SIGNAL SEL
CH
RECEIVER
EON
VSX-LX51_HY.book 37 ページ ２００８年４月１６日 水曜日 午後４時３９分
