Pioneer VSX-LX504 Instruction Manual Download

Page: 89 / 203

≫

≫

≫

≫

≫

≫

BLUETOOTH

Playback

You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone.

Basic Operations

Perform the following procedure when this unit is on.

Pairing

When you press the BLUETOOTH button, "Now Pairing..." is displayed on this

unit's display, and the pairing mode is enabled.

Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled

device, and then select this unit from among the devices displayed. If a

password is requested, enter "0000".

•

This unit is displayed as "Pioneer VSX-LX504 XXXXXX". This display can

be changed with the Friendly Name function

(

p176

) or the Pioneer

Remote App (can be used with the iOS or Android™).

•

To connect another BLUETOOTH-enabled device, press and hold the

BLUETOOTH button until "Now Pairing..." is displayed, and then perform

step 2. This unit can store the pairing information of up to 8 paired devices.

•

The coverage area is approx. 48´/15 m. Note that connection is not always

guaranteed with all BLUETOOTH-enabled devices.

Playing Back

Perform the connection procedure on the BLUETOOTH-enabled device.

Playing the music file.

The input on this unit automatically switches to "BLUETOOTH".

Turn up the volume of the BLUETOOTH-enabled device to an appropriate

level.

•

Due to the characteristics of BLUETOOTH wireless technology, the sound

produced on this unit may slightly be behind the sound played on the

BLUETOOTH-enabled device.

Pioneer VSX-LX504XXX

Summary of Contents for VSX-LX504












































































































































































































Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands

Pioneer VSX-LX504, Instruction Manual

Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands