Pioneer VSX-LX50 Operating Instructions Manual Download Page 50

Page: 50 / 82

Other connections

Use the

/

buttons to browse the selected

category (e.g., albums).

• Use

/

to move to previous/next levels.

Continue browsing until you arrive at what you

want to play, then press



to start playback.

Navigation through categories on your iPod looks like
this:

Playlists



Songs

Artists



Albums



Songs

Albums



Songs

Songs
Podcasts
Genres



Artists



Albums



Songs

Composers



Albums



Songs

Audiobooks
Shuffle Songs

Tip

• You can play all of the songs in a particular category

by selecting the

All

item at the top of each category

list. For example, you can play all the songs by a
particular artist.

Basic playback controls

The following table shows the basic playback controls for
your iPod:

Watching photos and video content

To view photos or video on your iPod, since video control
is not possible using this receiver, you must use the main

control of your iPod instead.

Press PHOTO to switch the iPod controls for photo

and video playback.

The receiver controls will be unavailable while you are
watching iPod videos or browsing photos.

Press PHOTO again to switch back to the receiver

controls when you’re done.

iPod® is a trademark of Apple Inc., registered in the U.S.
and other countries.

Note

1 If you’re in the song category, you can also press

ENTER

to start playback.

Button

What it does



Press to start playback.
If you start playback when something other than a
song is selected, all the songs that fall into that
category will play.



Press to stop playback.



Pauses playback, or restarts playback when
paused.

/

Press and hold during playback to start scanning.

/

Press to skip to previous/next track.

Press repeatedly to switch between

Repeat One

Repeat All

and

Repeat Off

Press repeatedly to switch between

Shuffle Songs

Shuffle Albums

and

Shuffle Off

DISP

Press repeatedly to change the song playback
information displayed.





During playback, press to skip to previous/next
playlist; when browsing, press to move to previous/
next levels.

/

During Audiobook playback, press to switch the
playback speed: Faster



Normal



Slower

TOP
MENU

Press to return to the

iPod Top

menu screen.

RETURN

Press to return to the previous level.

2 Your iPod nano currently restricts viewing of photo images stored.

VSX-LX50_HY.book Page 50 Thursday, March 8, 2007 1:18 PM

Summary of Contents for VSX-LX50



















































































Search results

Summary of Contents for VSX-LX50

Reviews:

Related manuals for VSX-LX50

Brands by name

Popular brands

Pioneer VSX-LX50, Operating Instructions Manual

Search results

Summary of Contents for VSX-LX50

Reviews:

Related manuals for VSX-LX50

Brands by name

Popular brands