En
25
> Before start
> Hookup
> Setup
> Playback
> Part Names
"BLUETOOTH", or "USB" input selector. If you have
"NET" selected in the main room and then select
"USB" in the separate room, the main room also
switches to "USB". You cannot select different stations
for the main room and separate room with the AM/FM
radio.
4. To adjust the volume on this unit, adjust with VOL+/– on
the remote controller. To control on the main unit, press
ZONE 2-CONTROL and adjust with the MASTER
VOLUME control within 8 seconds.
0
If ZONE 2 is on, power consumption during standby
becomes larger than normal.
To turn off the function
Press
Í
while in the mode for controlling ZONE 2 on the
remote controller. Alternatively press ZONE 2-ON/OFF on
the main unit.
Playing in ZONE 2 only
If you turn the unit to standby during multi-zone playback,
the Z2 indicator is dimmed and the playback mode is
switched to playback in a separate room only. Setting
ZONE 2 to on while this unit is in standby will also switch
the playback mode to the same setting.
AV Adjust
By pressing
on the remote controller during play, you
can adjust frequently used settings, such as the switching
the speakers and adjusting sound quality, using on-screen
menus. Select the item with the cursors of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press
.
"Tone":
It is possible to enhance or moderate the bass and
treble of front speakers. You can adjust the sound quality of
the connected power amplifier when you turn ZONE 2 on.
"Other":
Enables you to make a variety of settings.
0
"Sound Delay":
If the video is behind the audio, you can
delay the audio to offset the gap.
0
"Sound Retriever":
Improve the quality of compressed
audio.
0
"Speakers":
You can switch the output on the surround
back speakers and height speakers and switch the
output for speakers A/B.
Home
When you press
on the remote controller, the Home is
displayed and you can make settings in the various menus.
Select the item with the cursors of the remote controller and
press ENTER to confirm your selection. To return to the
previous screen, press
.
"System Setup":
Advanced settings to provide you with an
even better experience.
"MCACC":
Setup the speakers automatically or make
desired changes to the equalizer.
"Network/Bluetooth":
Make Wi-Fi connection settings or
settings related to BLUETOOTH.
When the unit is operating erratically
(Resetting this unit)
Restarting the unit may help it operate more smoothly. To
restart the unit, turn it to standby, and then press
Í
STANDBY/ON on the main unit for at least 5 seconds.
(The unit’s settings will be maintained.) If there is no
improvement even after the unit is restarted, try
disconnecting and reconnecting the power cords of the unit
and connected equipment. When there is still no
improvement, resetting the unit to the status at the time of
shipment may solve the problem. If you reset the unit
status, your preferences will be reset to the defaults. Note
them down before the operation below.
How to reset the unit
1. While holding down AUTO/DIRECT on the main unit,
press
Í
STANDBY/ON on the main unit.
2. "Clear" appears on the display and the unit returns to
standby. Do not unplug the power cord until "Clear"
disappears from the display.
To reset the remote controller, while holding down MODE,
press
until the remote indicator flash twice (about
3 seconds).
AV Adjust
Tone
Level
MCACC
Other
Bass
Treble
BD/DVD
SN29402194_VSX-301_BAS_En.book 25 ページ ２０１６年１月６日 水曜日 午前１２時５分
