Pioneer VSX-D709S, Operating Instructions Manual

Page: 6 / 84

6
Quick Start Guide
4 4
4 4
4
Digital Input Assignment
This is only necessary if you hooked up your DVD to DIGITAL IN 3, as in the first diagram on p. 5 (an
optical digital connection).
1 Press the RECEIVER.
This switches the remote to the surround setup
mode.
2 Press the SYSTEM SETUP button.
You should see the following display on your
receiver.
• You can escape from this screen at any time
by pressing the SYSTEM SETUP button
again. None of the settings you made will be
entered in this case.
• If don't enter any settings the receiver will
revert back to its previous state after three
minutes.
3 "Assign Set" should be selected (if it
isn't use the
5¥∞
buttons to select
it). Press ENTER.
You should see the following display on your
receiver.
4 "Digital in" should be selected (if it
isn't use the
5¥∞
buttons to select
it). Press ENTER.
You should see the following display on your
receiver.
5 Choose the "Digital-3" with
5¥∞
buttons you hooked up your DVD
player to. Press ENTER.
6 Choose the "DVD/LD" (if it isn't use
the
5¥∞
buttons to select it). Press
ENTER.
7 Select "Dig-In End" with
5¥∞
buttons and press ENTER to return
to the Dig-In Setup menu.
8 Select "Assign End" with
5¥∞
buttons and press ENTER to return
to the Assign Setup menu.
9 Select "Setup End" with
5¥∞
buttons and press ENTER to return
to the System Setup menu.
SOURCE
ENTER
LOUDNESS
INPUT ATT DIGITAL NR FL DIMMER
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
TV VOL TV
TVFUNK
D.ACCESS BAND
GUIDE MENU
CLASS
CHANNEL
EFFECT/CH SEL
RECEIVER
TV CONTROL
MASTER VOLUME
DISC
+10
VIDEO SELECT
MULTI CONTROL
MULTI CH INPUT
DVD
CD CD-R TUN TVC
RECEIVER
1 2 3
4 5 6
7 8 9
0
* ‹ &
TV
VCR
1 VCR
2
4 ¢
ENTER
TUNE
TUNE
ST ST
2
1
3-9
3 3
3 3 3
Setting up the Remote Control & Unit
1 Put the batteries in the Remote Control.
2 Plug the main unit into a AC wall outlet.
3 Press the STANDBY/ON button on the receiver to put the receiver in ON mode.