Using other functions
08
28
En
Chapter 8
Using other functions
Selecting the input signal type
The
DVD
,
TV/SAT
,
DVR/VCR
and
FRONT
inputs all have
both analog and digital jacks. You can select the type of
signal to be used in each case. The input signal type for
the current input is indicated in the display:
ANA
(analog),
DIG
(digital).
The default
AUTO
setting is usually sufficient, letting the
receiver decide the most suitable signal type. However, if
you want to record from the or the
DVR/VCR IN/OUT
jacks, then you should set the input signal type to analog.
•
Press SIGNAL SEL to change the input signal
type.
•
SEL. AUTO
– (default setting) Uses digital if available,
otherwise analog
•
SEL. ANA
– Uses the analog signal
•
SEL. DIG
– Uses the digital signal
Note
• When the
FM/AM
input is used, the display always
shows
ANA
(analog).
Using the sleep timer
The sleep timer automatically puts the receiver into
standby after the specified period of time.
1
Press RECEIVER.
2
Press SLEEP to set the sleep timer.
Press repeatedly to select between:
•
90 MIN.
– Switches to standby after 90 minutes
•
60 MIN.
– Switches to standby after one hour
• 30 MIN.
– Switches to standby after 30 minutes
The sleep timer indicator (
) lights when the sleep timer
has been set.
Tip
• Press the
SLEEP
button once to view how much time
is left on the timer before shutdown. Each press after
that will cycle through the possible sleep time
lengths.
SIGNAL SEL
RECEIVER
SLEEP
vsx-c302_FL.book 28 ページ ２００４年５月１０日 月曜日 午後５時８分
