Getting started
05
23
En
English
Playing a source
Here are the basic instructions for playing a source (such
as a DVD disc) with your home theater system.
1
Turn on the power of the playback component
(for example a DVD player), your TV and subwoofer
(if you have one).
• If your source is the TV’s built-in tuner, then switch to
the channel you want to watch, otherwise make sure
that the TV’s video input is set to this receiver. (For
example, if you connected this receiver to the
VIDEO
1
jacks on your TV, make sure that
VIDEO 1
input is
now selected.)
2
If the receiver isn’t already on, press
RECEIVER to switch it on.
3
Change the receiver input to the source you
want to play.
You can use the front panel
INPUT SELECTOR
knob or
the
INPUT
button on the remote.
4
Start playback of the DVD (or other component).
If you’re playing a Dolby Digital or DTS surround sound
DVD disc, you should hear surround sound. If you are
playing a stereo source, you will only hear sound from the
front left/right speakers in the default listening mode.
• See also
Home theater sound
on page 24 for more
information on different ways of listening to sources.
5
Use MASTER VOLUME (front panel or remote) to
adjust the volume level.
• Turn down the volume of your TV so that all the sound
is coming from the speakers connected to this
receiver.
Note
• If you need to change the input signal type from
digital to analog, press
SIGNAL SEL
(see also
Selecting the input signal type
on page 28).
• For more detailed surround sound setup, see
The
System Setup menu
on page 30.
RECEIVER
RECEIVER
SIGNAL SEL
DVD
TV/SAT
FRONT
FM/AM
DVR/VCR
MASTER
VOLUME
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-C302
INPUT SELECTOR
MASTER
VOLUME
STANDBY/ON
DOWN
UP
R
FRONT INPUT
DIGITAL IN
VIDEO
AUDIO
R
L
SOUND MODE
PHONES
ADVANCED
STEREO
2
DIGITAL
PHONES
AUTO
2
PRO LOGICII
DTS
vsx-c302_FL.book 23 ページ ２００４年５月１０日 月曜日 午後５時８分
