Pioneer VSX-C301-S, Service Manual

Page: 103 / 103

VSX-C301-S
103
5 6 7 8
5 6
7
8
C
D
F
A
B
E
Resetting the system
Use this feature to reset the system to its factory default
settings.
1 Press RECEIVER.
2 In standby, press ROOM SETUP and SYSTEM
SETUP at the same time.
The display prompts you to confirm.
3 Within 5 seconds, press LEVEL –.
The display shows OK .
4 Within 5 seconds, press LEVEL +.
The receiver should now be reset.
Note
• If the receiver is disconnected from the power outlet
for more than a month it will reset to the default
settings.
• The above reset doesn’t affect the presets that you
have programmed into the remote control (see Using
the remote control with other components).
SOURCE
RECEIVER
SLEEP
RECEIVER
AV DIRECT
INPUT
DVD STB
FRONT FM/AM
DVR/TV
SURROUND
ADV ANCED
SURROUND
SOUND
MODE
SIGNAL
SELECT DIAL OG
AU TO STEREO
LEVEL
TEST TONE CH SELECT
MUTE
MASTER
VOL
UME
DT V MENU
TOP MENU
T.EDIT
MENU
ROOM
SETUP
TUNE
ST ST
SYSTEM
SETUP
ENTER
Default receiver settings
The table below shows the factory default settings. When
you reset the system, the receiver reverts to these
defaults (see Resetting the system).
Note
• The default settings for the remote control to control
other components can be found in Using the remote
control with other components.
Setting type Default setting
Input DVD
Master volume – – – dB (no sound)
Listening mode AUTO
(all inputs)
Listening mode (w/
headphones) STEREO
(all inputs)
Sound mode OFF
Dialog OFF
Virtual Surround Back OFF
Input signal select AUTO
Speakers (Front,
Center, Surround)
Setting Automatically sensed
Subwoofer setting 200 Hz
LFE Attenuator 0 dB
Front speaker distance 10 ft.
Center speaker
distance 10 ft.
Surround speaker
distance 10 ft.
Dynamic Range
Control OFF
Dual Mono ch1
Input Attenuator OFF (all inputs)
DVD(TV/SAT) COAX
jack assignment
DVD
TV/SAT(DVD) OPT1
jack assignment
TV/SAT
Setting the volume
level of each channel Front: 0 dB
Center: 0 dB
Surround: 0 dB
Subwoofer: 0 dB
Room Setup M / MID