74
≫
≫
≫
≫
≫
≫
4. Channel Level
Adjust the volume level of each speaker.
Setting Item
Default Value
Setting Details
Front Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Center
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Front Right
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Height Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Height Right
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Surround Right
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Surround Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Subwoofer
0.0 dB
Select a value between "-15.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
5. Dolby Enabled Speaker
Change the settings of Dolby Enabled Speakers.
Setting Item
Default Value
Setting Details
Dolby Enabled
Speaker to Ceiling
6.0 ft/1.80 m
Set the distance between the Dolby Enabled
Speaker and the ceiling. Select between
"0.1 ft/0.03 m" and "15.0 ft/4.50 m" (0.1 ft/0.03 m
units).
•
The unit of distance (ft/m) is displayed using the
unit selected for the "Distance" setting.
Reflex Optimizer
Off
You can enhance the reflection effect of Dolby
Enabled Speakers from the ceiling.
"Off": When this function is not used
"On": When this function is used
•
The function is not effective if the listening mode
is Pure Direct.
•
This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby
Speaker".
6. Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and Off.
Setting Item
Default Value
Setting Details
Speaker
Virtualizer
On
When this is set to "On", a virtual speaker can be
set.
"On": When this function is used
"Off": When this function is not used
•
When this is set to "Off", some of the listening
modes cannot be selected. (
p56
