37
VSX-523-K
5
6
7
8
5
6
7
8
A
B
C
D
E
F
8. EACH SETTING AND ADJUSTMENT
8.1 ADJUSTMENT REQUIRED WHEN THE UNIT IS REPAIRED OR REPLACED
• If the adjustment is shifted or if it becomes necessary to readjust because of part replacement, etc., perform the
adjustment as described below.
• Any value changed in Adjustment mode will be stored in memory as soon as it is changed. Before readjustment, take note of
the original values for reference in case you need to restore the original settings.
• Use a stable AC power supply.
AMP5 Assy
"
8
.3 IDLE CURRE
N
T ADJUSTME
N
T" (All channel)
Other assemblies
N
o adjustment required
When any of the following assemblies is replaced
AMP5 Assy
"
8
.3 IDLE CURRE
N
T ADJUSTME
N
T"
(Only channel of replacement parts)
Other assemblies
N
ote:
Some parts on D-MAI
N
Assy can not be replaced due to using heat-pad connection between the board.
Please refer to [1.2
N
OTES O
N
REPLACI
N
G PARTS], when the parts listed in the table is defective, replace whole Assy.
N
o adjustment required
When any of the following parts is replaced
