The System Setup menu
06
47
En
Crossover Network
• Default setting:
80Hz
This setting decides the cutoff between bass sounds
playing back from the speakers selected as
LARGE
, or
the subwoofer, and bass sounds playing back from those
selected as
SMALL
. It also decides where the cutoff will
be for bass sounds in the LFE channel.
Note
• For more on selecting the speaker sizes, see
Speaker
Setting
above.
1
Select ‘Crossover Network’ from the Manual SP
Setup menu.
2
Choose the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or
LARGE
speakers).
3
When you’re finished, press RETURN.
You will return to the Manual SP Setup menu.
Note
• If you’re using a THX speaker setup, confirm that the
crossover frequency is set to
80Hz
.
Channel Level
Using the channel level settings, you can adjust the
overall balance of your speaker system, an important
factor when setting up a home theater system.
1
Select ‘Channel Level’ from the Manual SP Setup
menu.
2
Select a setup option.
•
Manual
– Move the test tone manually from speaker
to speaker and adjust individual channel levels.
•
Auto
– Adjust channel levels as the test tone moves
from speaker to speaker automatically.
3
Confirm your selected setup option.
The test tones will start after you press
ENTER
.
4
Adjust the level of each channel using the
/
(cursor left/right) buttons.
If you selected
Manual
, use
/
(cursor up/down) to
switch speakers. The
Auto
setup will output test tones in
the order shown on-screen:
Adjust the level of each speaker as the test tone is
emitted.
4. Manual SP Setup
[
a . Speaker Setting
]
[
b . Crossover Network
]
[ c . Channel Level
]
[ d . Speaker Distance
]
[ e . THX Audio Setting
]
4b. Crossover Network
Frequency
[
80Hz
]
(THX Speaker = 80Hz)
4. Manual SP Setup
[
a . Speaker Setting
]
[ b . Crossover Network
]
[
c . Channel Level
]
[ d . Speaker Distance
]
[ e . THX Audio Setting
]
4c. Channel Level
Test Tone
[ [
Auto
] ]
Enter :
Next
Return : Cancel
4c. Channel Level
Test Tone
[
Manual
]
Enter :
Next
Return : Cancel
4c. Channel Level
Test Tone
[
Manual
]
Setting Start
Please Wait
Caution!!
Test tone is
output loudly.
Return:Cancel
4c. Channel Level
Left
[
+
0.5dB
]
Center
[ 0.0dB]
Right
[ 0.0dB]
Surround R
[ 0.0dB]
Surr Back R
[ 0.0dB]
Surr Back L
[ 0.0dB]
Surround L
[ 0.0dB]
Sub Woofer
[ 0.0dB]
Return:Finish
VSX_1015.book.fm 47 ページ ２００４年１１月２９日 月曜日 午後２時３８分
