Controls and displays
04
29
En
7
TV CONTROL buttons
These buttons are dedicated to control the TV assigned to
the
TV CONT
button. Thus if you only have one TV to hook
up to this system assign it to the
TV CONT MULTI
CONTROL
button. If you have two TVs, assign the main
TV to the
TV CONT
button (see page 54 for more on this).
TV
Use to turn on/off the power of the TV.
TV VOL +/–
Use to adjust the volume on your TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
8
Component control buttons
The main buttons (
,
, etc.) are used to control a
component after you have selected it using the
MULTI
CONTROL
buttons.
The controls above these buttons can be accessed after
you have selected the corresponding
MULTI CONTROL
button (for example
DVD/LD
,
DVR/VCR
or
TV/SAT
).
TUNER DISPLAY
Switches between named station presets, radio
frequencies and RDS information (page 50).
MPX
Switches between stereo and mono reception of FM
broadcasts. If the signal is weak then switching to
mono will improve the sound quality (page 49).
AUDIO
Changes the audio language or channel on DVD
discs.
CH RETURN
Returns to the last channel selected with SAT and
some TVs.
SUBTITLE
Displays/changes the subtitles included in
multilingual DVD-Video discs.
CH +/–
Use to select channels when using a TV, VCR, DVR,
etc.
The following DVR controls can be accessed by pressing
SHIFT
:
REC
Starts recording.
REC STOP
Stops recording.
HDD/DVD
These buttons switch between the hard disk and DVD
controls for DVD/HDD recorders.
9
RECEIVER CONTROL buttons
THX
Press to select a Home THX listening mode
(page 32).
STANDARD
Press for Standard decoding and to switch between
the various Pro Logic IIx and Neo:6 options (page 31).
ADV. SURR
Use to switch between the various surround modes
(page 33).
STEREO
Switches between direct and stereo playback. Direct
playback bypasses the tone controls and any other
signal processing for the most accurate reproduction
of a source (page 34).
AUTO SURR
Press to have the receiver automatically detect what
kind of source you’re playing and select multichannel
or stereo playback as necessary (page 31).
ACOUSTIC EQ
Press to select an Acoustic Calibration EQ setting
(page 34).
SIGNAL SELECT
Use to select an input signal (page 35).
MIDNIGHT/LOUDNESS
Use Midnight when listening to movie soundtracks at
low volume. Use Loudness to boost the bass and
treble at low volume (page 38).
EFFECT/CH SEL
Press repeatedly to select a channel, then use –/+ to
adjust the level
(page 47). Also adjusts the level of the
Advanced Surround effects (page 33) as well as
Dolby Pro Logic IIx Music (page 33) and Neo:6 Music
parameters (page 34). You can then use the
+
and
–
buttons to make these adjustments.
+/–
Use to adjust the effect and channel levels, as well as
to change Dolby Pro Logic IIx and Neo:6 Music
parameter settings.
SLEEP (SHIFT & –)
Use to put the receiver in sleep mode and select the
amount of time before the receiver turns off
(page 39).
DIALOG E (SHIFT & +)
Use to make dialog stand out when watching TV or a
movie (page 38).
10 SHIFT
Press to access the DVR controls (above the component
control buttons) as well as some
RECEIVER
controls.
VSX_1015.book.fm 29 ページ ２００５年３月７日 月曜日 午後７時０分
