Pioneer TORAIZ SP-16, Operating Instructions Manual

Page: 10 / 112

En
10
2 Tap [ARRANGEMENT].
[ ARRANGEMENT ] lights. In this state, patterns are played in the order in
which they were sorted in this screen.
3 Press the [
d
] button.
The [
d
] button lights in green and the arrangement of the demo project
plays. The playback icon (
d
) is displayed in the column of the currently
playing pattern on the touch display.
Changing the demo project sound
Step modulation
1 Tap the track which you wish to change and tap again
to enter.
The track menu screen appears.
! You can also go to the track menu screen by turning the rotary selec-
tor to select a track and then pressing the rotary selector.
2 Tap [PLAYBACK] and tap again in the selected state.
The playback screen appears.
! You can also go to the track menu screen by turning the rotary selec-
tor to select [ PLAYBACK ] and then pressing the rotary selector.
3 Turn the parameter 1 adjustment knob while pressing
the 16-step key [13].
Now, the pitch of the sample will change only at the fourth beat.
! Other steps and other parameters can be changed with the same
operation.
Analog filter
Use the dials to sculpt your sound – manipulating Drive, Cut Off and
Resonance – and add true analogue warmth and presence.
1 Press the [ACTIVE] button.
The analog filter effect is enabled (activated). In the active state, the
button is lit in red.
2 Turn the [LOW PASS CUTOFF] control.
The low-pass filter’s cutoff frequency changes.
! Turning the control counterclockwise moves the cutoff frequency
toward the lower frequencies, and turning it clockwise moves the
cutoff frequency toward the higher frequencies.
3 Turn the [LOW PASS RESONANCE] control.
The low-pass filter’s resonance changes.
! Turning the control counterclockwise reduces the resonance of
sound in the vicinity of the cutoff frequency, and turning it increases
the resonance.
4 Turn the [HIGH PASS CUTOFF] control.
The high-pass filter’s cutoff frequency changes.
! Turning the control counterclockwise moves the cutoff frequency
toward the lower frequencies, and turning it clockwise moves the
cutoff frequency toward the higher frequencies.
5 Turn the [DRIVE] control.
The analog filter’s drive amount is adjusted.
!
Turning the control counterclockwise reduces the effect, and turning
it clockwise increases the effect.
!
If the effect is made large, the output sound may be distorted. When
that happens, the OVER indicator lights in amber so that you can
know that a distortion effect is occurring due to the analog filter
circuit.