Front
(front speakers)
—
Center
(center speak-
er)
—
Rear
(rear speakers)
—
Subwoofer
(sub-
woofer)
—
Phase
(subwoofer setting)
#
You can switch to
Phase
only when the sub-
woofer has been set to
On
.
3
Touch
c
or
d
to select the correct size
for the selected speaker.
Each time you touch
c
or
d
selects the size in
the following order:
Off
(off)
—
Small
(small)
—
Large
(large)
#
You cannot select
Off
, when
Front
(front
speakers) have been selected.
#
You can select
On
or
Off
, when
Subwoofer
(subwoofer) has been selected.
#
You can switch
Reverse
(reverse phase) or
Normal
(normal phase), when
Phase
(subwoofer
setting) has been selected.
Correcting the subwoofer
’
s phase
If trying to boost the bass output of the sub-
woofer doesn
’
t do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofer
’
s output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
1
Touch Speaker Setting.
2
Touch
a
or
b
to select Subwoofer (sub-
woofer).
Each time you touch
a
or
b
selects the speak-
er in the following order:
Front
(front speakers)
—
Center
(center speak-
er)
—
Rear
(rear speakers)
—
Subwoofer
(sub-
woofer)
—
Phase
(subwoofer setting)
3
Touch
d
to turn subwoofer output on.
#
To turn subwoofer output off, touch
c
.
4
Touch
b
and then touch
c
or
d
to se-
lect the phase of subwoofer output.
Touch
d
to select normal phase and
Normal
appears in the display. Touch
c
to select re-
verse phase and
Reverse
appears in the dis-
play.
Note
When playing a 2-channel mono source with
Dolby Pro Logic II turned on, there may be occa-
sions when the following will occur:
!
No audio is outputted if the center speaker
setting is
Small
or
Large
and no center speak-
er is installed.
!
Audio is heard only over the center speaker if
installed and the center speaker setting is
Small
or
Large
.
Adjusting the speaker output
levels
Speaker level can be adjusted finely by listen-
ing to an audio output. First, use test tone to
adjust the approximate speaker level, and then
use this function to adjust finely.
1
Touch Speaker Level.
2
Touch
a
or
b
to select the speaker to
be adjusted.
Each time you touch
a
or
b
selects the speak-
er in the following order:
Front-L
(front speaker left)
—
Center
(center
speaker)
—
Front-R
(front speaker right)
—
Rear-R
(rear speaker right)
—
Rear-L
(rear
speaker left)
—
Subwoofer
(subwoofer)
#
You cannot select speakers whose size is set
to
Off
. (Refer to
Setting the speaker setting
on the
previous page.)
3
Touch
c
or
d
to adjust the speaker out-
put level.
Each time you touch
c
or
d
it increases or de-
creases the equalizer level.
+10
to
–
10
is dis-
played as the level is increased or decreased.
Note
To adjust the speaker output levels in this mode is
the same as making the speaker output levels at
Test Tone
. Both provide the same results.
Available accessories
En
86
Section
19
