Black plate (72,1)
<CRB2123-A/U>72
12 Store the microphone carefully in the
glove compartment.
Store the microphone carefully in the glove
compartment or any other safe place. If the
microphone is subjected to direct sunlight for
an extended period, high temperatures may
cause distortion, color change or mal-
function.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
EQ FLAT
Flat
CUSTOM1
Custom 1
CUSTOM2
Custom 2
SPR-BASS
Super bass
!
CUSTOM1
and
CUSTOM2
are adjusted
equalizer curves.
!
When
EQ FLAT
is selected no supplement
or correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
EQ FLAT
and a set equalizer curve.
%
Press EQ to select the equalizer.
Press
EQ
repeatedly to switch between the fol-
lowing equalizers:
POWERFUL
NATURAL
VOCAL
EQ FLAT
CUSTOM1
CUSTOM2
SPR-BASS
Adjusting 3-band parametric
equalizer
For
CUSTOM1
and
CUSTOM2
equalizer
curves, you can adjust the front, rear and cen-
ter equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.
!
A separate
CUSTOM1
curve can be cre-
ated for each source.
!
A
CUSTOM2
curve can be created com-
mon to all sources.
!
The center speaker largely determines the
sound image and getting the balance right
isn
t easy. We recommend reproducing a 2-
ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.
1 Press A and hold until FRONT appears
in the display, then press A to select PEQ.
After
FRONT
is displayed, press
A
until
PEQ
appears in the display.
#
Adjusted
PEQ
settings are memorized in
CUSTOM1
.
2 Press
r
or
q
to select the speaker to
be adjusted.
Each press of
r
or
q
selects the speaker in
the following order:
FRT
(front speakers)
CEN
(center speaker)
RER
(rear speakers)
#
You cannot select speakers whose size is set
at
OFF
.
3 Press
n
and then press
r
or
q
to
select the equalizer band to be adjusted.
Each press of
r
or
q
selects equalizer
bands in the following order:
LOW
(low)
MID
(mid)
HI
(high)
Digital Signal Processor
En
72
Section
12
