Black plate (18,1)
<CRB2123-A/U>18
Listening to the radio
2
1
3
5
4
4
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1
Band indicator
Shows which band the radio is tuned to, AM
or FM.
2
Signal level indicator
Shows the radio wave strength.
3
Frequency indicator
Shows to which frequency the tuner is
tuned.
4
Stereo (
5
) indicator
Shows when the frequency selected is
being broadcast in stereo.
5
Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
TUNER
dis-
played.
2 Press BAND to select aband.
Press
BAND
until the desired band is dis-
played,
F1
,
F2
,
F3
for FM or
AM
.
3 To perform manual tuning, press
m
or
n
with quick presses.
The frequencies move up or down step by
step.
4 To perform seek tuning, press and hold
m
or
n
for about one second and re-
lease.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pressing either
m
or
n
with a quick press.
#
If you press and hold
m
or
n
you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (
5
) indicator will light.
Tuner
En
18
Section
05
