%
Touch AM STEP on the initial menu to
select the AM tuning step.
Touching
AM STEP
will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
FULL
) or subwoofer (
S.W
) con-
nection. If you switch the rear output setting
to
S.W
, you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
ary amp.
Initially, the unit is set for rear full-range speak-
er connection (
FULL
). When rear output is
connected to full range speakers (when
FULL
is selected), you can connect other full range
speakers (
REAR
) or a subwoofer (
S.W
) to the
RCA rear output.
!
When the multi-channel processor (e.g.,
DEQ-P7650) is connected to this unit, you
cannot operate this function.
1
Touch REAR SP on the initial menu.
2
Touch
c
or
d
next to REAR SP to switch
the rear output setting.
Touch
c
to select full-range speaker and
FULL
appears in the display. Touch
d
to select sub-
woofer and
S.W
appears in the display.
#
When no subwoofer is connected to the rear
output, select
FULL
(full-range speaker).
#
When a subwoofer is connected to the rear
output, select
S.W
(subwoofer).
#
When the rear output setting is
S.W
, you can-
not operate the following procedure.
3
Touch
c
or
d
next to PREOUT to switch
the subwoofer output or rear output.
Touching
c
or
d
will switch between
S.W
and
REAR
and that status will be displayed.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output
on page
36).
!
If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the sound muting/
attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
%
Touch TEL to select any of the muting,
attenuation or off.
Touch
TEL
until the desired setting appears in
the display.
!
MUTE
–
Muting
!
ATT -20dB
–
Attenuation (
ATT -20dB
has a
stronger effect than
ATT -10dB
)
!
ATT -10dB
–
Attenuation
!
OFF
–
Turn the sound muting/attenuation
off
Notes
!
The sound is turned off,
MUTE
is displayed
and no audio adjustments are possible.
!
The sound is attenuated,
ATT
is displayed and
no audio adjustments, except volume control,
are possible.
!
Operation returns to normal when the phone
connection is ended.
Operating this unit
En
43
Section
03
Operating
this
unit
