STEP-5e User Manual
Page 1
Important Safety Instructions
1.
Safety warning
Warnings: The print head will become very hot during printing; avoid touching the print head
after printing has finished.
Warnings:
Do not touch the printer head and connector in case static damage the printer head.
This must be complied with in order to avoid any injury and damage to the equipment.
This is showing the important information and tips for the printer operating.
2.
Instructions
Carefully read the installation and operating instructions provided with the printer before starting up
your printer.
1)
Place the printer on a flat and stable surface.
2)
Leave enough space around printer for operation and maintenance.
3)
Do not insert anything into the ventilation slots or openings on the printer.
4)
Do not place the printer on or near a heat source.
5)
Do not use the printer near water. Never spill liquid into the printer.
6)
Do not expose the printer to high temperatures, direct sunlight or dust.
7)
Protect the printer from shock, impact and vibration.
8)
Be certain the power source is within the voltage rating and frequency listed for the printer.
9)
Switch off the printer power supply when won’t use it for a long time.
10)
Do not place the power cord where it can be stepped on. If the power cord becomes damaged
or frayed, replace it immediately.
11)
To ensure the print quality and reliability, you are suggested to use the recommended paper or
the same quality paper.
12)
Pls switch off the power supply when connect/disconnect all the ports or it will cause damage
to the printer control circuit.
13)
Never carry out maintenance or repair work yourself. Always contact a qualified service
technician.
14)
Keep this User Manual in a place which is easily accessible at all times.
