- 44 -
En
gl
ish
[Parking Assist Guide
Adjust]
1
Adjusting the guidelines by dragging or touching
/
/
/
on the screen.
2
Touch [OK] to finish the settings.
Touch [reset] to reset the settings.
CAUTION
•
When adjusting the guidelines, be sure to park the vehicle in a
safe place and apply the handbrake.
•
Before getting out of the car to place the markings, be sure to
turn the ignition switch off (ACC OFF).
•
The range projected by the rear view camera is limited. Also, the
vehicle width and distance guidelines displayed on the rear view
camera image may differ from the actual vehicle width and
distance. (The guidelines are straight lines.)
•
The image quality may deteriorate depending on the usage
environment, such as at night or in dark surroundings.
NOTES
•
This setting is available only when you stop your vehicle in a safe
place and apply the handbrake.
•
Using packing tape or similar tape place markings as shown
below before setting up the guidelines so that the guidelines can
be overlaid to the markings.
[Rear View Camera
Adjustment]
Adjust following menu, touch [+]/[-] to adjust.
[Brightness]
[-10] to [+10]
Adjust the black intensity.
[Contrast]
[-10] to [+10]
Adjust the contrast.
Menu Item
Description
50 cm
Markings
Markings
Rear bumper
2 m
25 cm
25 cm
