54
SC-57
1
2
3
4
A
B
C
D
E
F
1
2
3
4
[2] Rear Section
When you perform diagnosis on the side-B of
AUDIO ASSY, please refer to last part of Step,
“[5-2] Diagnosis”.
Remove the Bonnet 85 by removing the 16
screws.
-----------------------------------------------------------------
[2-1] Rear Section
(1) Cut the Binder.
(2) Release the cables from the two PCB
binders.
(3) Remove the 39P FFC (ADD7746) by
disconnect the two connectors.
(4) Disconnect the three connectors.
(5) Remove the screw. (BBZ30P060FCC)
Notes on assembling
∗
1: HDMI Cabel and 5P Housing ASSY
(ADX7748) bind together inside.
∗
2: Attention to style cables as shown in the
photo.
(6) Remove the 15P FFC (ADD7725) by
disconnect the two connectors.
(7) Release the jumper wire (ADX7746: from
COMPONENT ASSY) from hook of the
VREG GUARD ASSY.
(8) Release the jumper wires from two PCB
binders.
(9) Disconnect the connector.
Notes on assembling
∗
1: Twist PCB binder around the jumper wire
(ADX7746) so that it does not contact
FB-CONNECT ASSY or plate.
∗
2: Four jumper wires don't contact.
∗
3: PCB binder tilt in the direction of the blue
arrow and pull the jumper wire (ADX7745:
from AUDIO ASSY) to the opposite direction
(blue arrow) .
CN2503
6
6
8
8
9
7
5
1
2
3
4
4
3
2
15P FFC
VREG GUARD ASSY
ADX7746
CONNECT ASSY
DIGITAL MAIN ASSY
FB-CONNECT ASSY
AUDIO ASSY
A REG BRIDGE ASSY
FRONT BRIDGE ASSY
Front
Front
∗
1
∗
2
∗
3
CN7724
JA905
CN601
CN7651
CN5775
x 2
DISPLAY BRIDGE ASSY
HDMI Cable
5P Housing ASSY
∗
1
∗
2
∗
2