6
SC-57
1
2
3
4
A
B
C
D
E
F
1
2
3
4
1.4 NOTES ON ASSEMBLING
IR BUFFER ASSY
Accessory of Panel Base
IR Cover 85
IR POWER AMP ASSY
Rear Panel 57U
BUFFER GND ASSY
Note : The right and left positions for the attachment positioning of IR amplifier block are gradual, however, adjust the front
and back positions correctly. For the positioning procedure, refer to "7. DISASSEMBLY".
When assembling the IR amplifier block, please note the following points of screws to prevent from short-circuit.
The following 7 points of screws must always be used AMZ30P060FTC
Points to be watched for swarf
If a screw at any of these points needs to be removed for service,
be sure to check that the swarf is not on the screw before refastening.