Pioneer SBX-N500, Operating Instructions Manual

Page: 32 / 68

Basic operations 32
En
Basic oper
ations
3
Playing specified range of
chapter (file) in random order
You can select from 2 types of random
playback.
1. Select [Mode].
Use

/
b
to select, then press
ENTER
.
2. Select the playing mode.
Use

/
b
to select, then press
ENTER
.

Random play
The specified range of chapter (file) is played
in random order. The same item may be played
consecutively.

Shuffle play
The specified range of chapter (file) is played in
random order. Each item is played once.
Switching the subtitles
For files on which multiple subtitles are
recorded, the subtitles can be switched during
playback.
1. The subtitles can be switched by
selecting [
Subtitle
] from the
TOOLS
menu.

Turning the subtitles off
Select [Subtitle] from the TOOLS menu to
switch the setting to Off.
Switching the audio
For files on which multiple audio streams/
channels are recorded, audio streams/
channels can be switched during playback.
1. The audio can be switched by selecting
[
Audio
] from the
TOOLS
menu.
Playing photos as slideshows
This function plays the photos, switching them
automatically.

Rotating/inverting photos
When a slideshow is playing or paused, the
display switches as shown below when the

/
b
/
c
/
d
are pressed.
d
: Rotates 90° clockwise
c
: Rotates 90° counterclockwise

: Flips vertically
b
: Flips horizontally

About Slideshow
A display of the files in the folder switches
automatically.
Note
• Depending on the connected device and its
status, it may take some time for playback to start,
switching between screens, or for other operations.
• Some files cannot be played back using this
function.
• Some files have limitations on their playback
count.
Switch Play Mode
Playback range can be selected from within a
folder, or within the selected USB device.
1. Press SETUP while stopped.
The Initial Setup screen is displayed.
2. Select and confirm [Playback]
d
[Play
Mode] d [All Play] or [Folder Play].
Use

/
b
to select, then press ENTER .
y Folder Play:
Playback files from the
selected folder.
y All Play:
Playback all files on the selected
USB device.
Caution
• When using [All Play] , a new file list will be
displayed on the unit, regardless of original folder
composition, and then played back in the order
that they are displayed.
• The order the files are displayed in on the unit’s file
list may be different from the original order on your
computer.
• Playback will stop once the final file on the file list
is played.
• If you want to playback again from the top of the
file list use the repeat function (“Playing repeatedly
(Repeat Play)” on page 31).
72-MCS838-EU0B2_En.indd 32 2013/09/05 11:57:00