Pioneer SBX-N500, Operating Instructions Manual

Page: 25 / 68

Connecting 25
En
C
onnec
ting
2
Notes on Network Connection:
• Many network connection problems during set
up can often be fixed by re-setting the router or
modem. After connecting the unit to the home
network, quickly power off and/or disconnect
the power cord of the home network router or
cable modem. Then power on and/or connect
the power cord again.
• Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
• Our company is not responsible for any
malfunction of the unit and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
• Some internet contents may require a higher
bandwidth connection.
• Even if the unit is properly connected and
configured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of your
internet service, or problems at the provider
of the content.
• Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
• Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
• A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this unit. If
your internet service does not allow for such
a connection, you will not be able to connect
the unit.
• You must use a Router to use xDSL service.
• xDSL modem is required to use xDSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in this
unit or you may be limited to the number of
devices you can connect at the same time.
(If your ISP limits subscription to one device,
this unit may not be allowed to connect
when a computer is already connected.)
• The use of a “Router” may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
• The wireless network operate at 2.4 GHz
radio frequencies that are also used by
other household devices such as cordless
telephone, microwave oven, and can be
affected by interference from them.
• Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
• For the purpose of the better transmission,
placing the unit from the access point as
close as possible.
• In some instances, placing the access point
or wireless router at least 0.45 m above the
floor may improve the reception.
• Move closer to the access point if possible or
re-orient the unit so there is nothing between
it and the access point.
• The reception quality over wireless depends
on many factors such as type of the access
point, distance between the unit and access
point, and the location of the unit.
• Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
72-MCS838-EU0B2_En.indd 25 2013/09/05 11:56:59