Pioneer S-HTD630 Operating Instruction Download Page 29

Page: 29 / 96

Controls and displays

Transmitter antenna

Transmits signals to the wireless speaker.

Wireless speaker antenna

Receives signals from the transmitter.

POWER

Press to switch the unit on or off.

WIRELESS MODE switch

Slide to select either

W.SURROUND

W.STEREO

mode. See

Using the wireless

speaker system

on page 41 for more on these

modes.

•

W.SURROUND

— Sounds going to the

surround left and right channels are heard
through the wireless speakers.

•

W.STEREO

— Any source playing through

the main system is heard in stereo through
the wireless speakers (multichannel
sources will be downmixed to stereo).

• The system should be in standby when

switching between modes (see

Using the

wireless speaker system

on page 41).

• If the mode of the wireless speaker system

and the mode of the DVD receiver do not
match, loud noise may be output from the
wireless speaker system.

• The

STEREO MODE VOLUME

control can

be used to adjust the volume when

W.STEREO

is selected.

STEREO MODE VOLUME

Turn to adjust the speaker volume when the

WIRELESS MODE

is set to

W.STEREO

When set to

W.SURROUND

, the volume

control does not operate. The volume changes
automatically.

POWER indicator

Lights when the wireless speaker is switched
on.

TUNED indicator

Lights when the signal from the transmitter is
properly received.

• For more on using the wireless speaker

system

Using the wireless speaker system

on page 41.

XV-HTD640.book 29 ページ２００４年２月２５日　水曜日　午後４時１４分

Summary of Contents for S-HTD630

































































































Search results

Summary of Contents for S-HTD630

Reviews:

Related manuals for S-HTD630

Brands by name

Popular brands

Pioneer S-HTD630, Operating Instruction

Search results

Summary of Contents for S-HTD630

Reviews:

Related manuals for S-HTD630

Brands by name

Popular brands