The Initial Settings menu
12
58
En
Digital Audio Mode Settings
Make these settings if you connect an
external digital component to the optical
digital output. Note that DVD-Audio and
SACD audio is not output through this jack.
Dolby Digital Out
• Default setting:
Dolby Digital
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
Dolby Digital Out
DTS Out
Linear PCM Out
Dolby Digital
Dolby Digital > PCM
Initial Settings
If the connected component is Dolby Digital
compatible, set to
Dolby Digital
, otherwise
set to
Dolby Digital > PCM
. Check the
manual that came with the other component
if you’re unsure whether it is Dolby Digital
compatible.
DTS Out
• Default setting:
DTS
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
Dolby Digital Out
DTS Out
Linear PCM Out
DTS
DTS > PCM
Initial Settings
If the connected component has a built-in
DTS decoder, set this to
DTS
, otherwise set
to
DTS > PCM
. Check the manual that came
with the other component if you’re unsure
whether it is DTS compatible.
Using the Initial Settings
menu
The Initial Settings menu is where you can
set preferences for language, audio and
video output, and so on.
If a menu option is grayed out it means that
it cannot be changed at the current time.
This is usually because a disc is playing.
Stop the disc, then change the setting.
1
Press DVD SETUP and select ‘Initial
Settings’ from the on-screen display.
Play Mode
Disc Navigator
Video Adjust
Initial Settings
2
Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3
Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or
region.
Summary of Contents for S-DV1000ST
Page 1: ......
Page 92: ...Additional information 14 92 En ...
