Basic Functions
11
12
Setting the TIMER function
Basic Functions
Setting TIMER ON and
TIMER OFF simultaneously:
Users are able to configure both the
ON and OFF settings of the timer
function. Be sure to note that the
time periods that are set for either
of the functions are the amount of
hours after the current time.
Ex:
If the current time is 1 p.m., and
the user wants the system to
turn itself on at 7 p.m. and run
for 2 hours, they would do the
following:
Configure the TIMER ON feature of the system to turn itself on in 6 hours:
Configure the TIMER OFF feature of the system to turn itself off in 8 hours:
Setting the TIMER function
The example on page
11
shows how to set the system to turn on after 6
hours, operate for 2 hours, and then turn itself off. See the figure below:
The remote display will be as shown:
Note:
If the user wishes to incorporate the scheduling feature, which
will enable the ability to set specific times of each day of the
week where the unit will turn off and on, they may purchase the
Pioneer Wireless Internet Access & Control Module. This accessory
is sold seperately, and is available at www.pioneerminisplit.com.
