background image

91

PRV-LX10

En

English

Item

PROJECT

Make Disc

Make Disc

Make Disc

Make Disc

Make Disc

Make Disc

Make Disc

Make Disc

Make Disc

Make Disc

Make Disc

Make Image

Make Image

Trimming

Trimming

Trimming

Trimming

Trimming

Divide

Divide

Divide

Divide

Divide

Divide

Divide

Initialize Library

Delete Library

Delete Library

Delete Library

Message

Not enough space in HDD.

Data size is over 4.7GBytes.

The size of menu is too large.

There is no disc.

This is not a blank disc.

The disc needs to be initialized.

This is an illegal disc.

There is no title.

The number of titles is over 99.

Make disc failed.

Current TV System differs from a menu clip TV
System.

Different audio encoding formats can’t exist in
intro and idle clips.

Invalid target file name.

Not enough space in HDD.

Do you want to update or create a new clip ?

This VOB can't be trimmed.

New clip can’t be created unless duration is under
HH:MM

Please cut clip less than HH:MM

New clip can’t be created.
Clips should be less than 255.

Do you want to update or create a new clip?

This VOB can’t be divided.

There is no remaining capacity.
New clip can’t be created.

There is no remaining capacity.
This VOB can’t be divided.

There are too many clips.
Over 255 clips can’t be created.

The number of titles is 99.
This VOB can’t be divided.

The number of clips is 255.
This VOB can’t be divided.

Do you really want to Initialize?

Default Layout/Background can’t be deleted.

Please select Layout/Background before delete.

Do you really want to delete ******

Comment

No free space left on the hard disk. Delete projects no longer
needed to provide enough space for recording.

The current project title capacity exceeds 4.7 GB. Use the Title
editing [

Title Selection

] command to reduce the number of

titles, or use trimming editing to shorten the length of titles.

The attached menu size is too large for the current project title
composition. Change to a menu design with more buttons on
each page of the menu. Also, by changing to title menu, it may
be possible to construct the menu with a smaller volume.

No disc has been loaded in the designated drive.

The designated disc has recorded contents.

The designated disc has not yet been initialized. Initialization
is necessary before recording.

The designated drive contains an improper disc.

No title has been assigned.

99 titles already exist.
A DVD-Video disc can hold a maximum of 99 titles.

Disc could not be created. A disc fault may have occurred.

The current TV system mode must be the same as that of the
menu clip.

The menu clips must have the same audio type.

See 

“About File Names”

 (page 94).

The hard disk does not have sufficient empty space to
create the file.

Select whether to save the edited data to a new file or to
overwrite the original file.

This VOB cannot be trimmed.

Not enough space on the hard disk to save as a separate item
to disk. Overwriting is possible. The item can be saved
separately if trimming time is HH:MM or less.

Not enough space on the hard disk for trimming. Trimming is
possible if trimming time is HH:MM or less.

Too many clips already exist, so cannot create a new one. To
save new clip, reduce the number of existing clips.

Confirm whether you wish to overwrite edited results or create
a new clip.

This VOB cannot be divided.

The hard disk has insufficient space to create a new clip. Can
only overwrite previous clip.

The hard disk has insufficient space to allow division of the
clip.

Too many clips already exist, so cannot create a new one.

Too many titles already exist, so cannot divide the VOB.

Too many clips already exist, so cannot divide the VOB.

Initializes library. This deletes imported libraries.

Layouts and background images set in the default menu cannot
be deleted.

Select layout/background image to delete.

The ****** file will be deleted.

Message Display

Summary of Contents for PRV-LX10









































































































Reviews: