12
En
01 Before You Start
Connecting up to your TV
Use the supplied AV cable to connect this DVD player to your TV. This cable feeds both audio and video
to your TV. Before connecting, make sure that both this player and your TV are switched off and
disconnected from the wall outlet.
AUDIO
IN/OUT
VIDEO
IN/OUT
DC IN 9.8V
+
–
AUDIO IN
VIDEO IN
R
L
Supplied AV cable
Audio input
Video input
• Read the instructions that came with
your TV if you’re unsure which inputs
to use.
• Do not connect this player to your TV
through a VCR. Some discs are copy-
protected and will not play properly
when played via a VCR or when
recorded on a VCR.
• See pages 53 to 55 for how to connect
this player up to an AV amplifier and
other components.
Setting the TV system
(Except US and Canadian models)
This player is compatible with both PAL
and NTSC TV systems. If your TV is
compatible with both systems then set the
TV
SYSTEM
switch to
AUTO
, otherwise set
it to the system your country or region uses.
PAL / LCD
AUTO
NTSC
TV SYSTEM
• When using the PDV-LC20 with the
built-in screen, always set to
PAL
/
LCD
.
• You cannot play PAL DVDs when the
TV
SYSTEM
switch is set to
NTSC
.
• You may need to adjust the vertical
hold control on some PAL TVs when
playing NTSC discs. Depending on the
TV, you may also see black bars at the
top and bottom of the screen.
Black
ringed
plug
Yellow
ringed
plug
Red/white
plugs
Yellow plug