manualshive.com logo in svg

Pioneer PDP-505HD, Service Manual

Share
Download
Pioneer PDP-505HD Service Manual Download Page 76

PDP-505HD

76

DRIVE ADJ mode
in Factory mode
X-SUS-G.…..."2" Key
Y-SUS-G .….."4" Key

VR700 (VOFS)
Y DRIVE ASSY

VR750 (VH)
Y DRIVE ASSY

VR851 (IC5V)
Y DRIVE ASSY

VOFS (Offset voltage) adjustment
Adjust so that the voltage between TP705 (VOFS) and TP703 (SUS
GND) becomes ± 0.5V" of the voltage indicated at the "voltage
indication label".

The symptom in case of mis-adjustment
If the VOFS adjustment is not performed properly, dots like blinking
luminance points appear. If deviated greatly from the right adjustment
point, Panel will light white.

VH (voltage for Scan IC) adjustment
Adjust so that the voltage between TP751 (VH) and TP753 (PSUS)
becomes "103V ± 0.5V".
PSUS (=GNDH) is a floating GND and the electric potential is different
from that of chassis GND. Be sure not to short-circuit PSUS (=GNDH)
and another GND, because that may damage the unit.

The symptom in case of mis-adjustment
If the VH adjustment is not performed properly, dots like blinking
luminance points appear. If deviated greatly from the right adjustment
point, panel will light white.

IC5V adjustment
Adjust so that the voltage between TP851 (IC5V) and TP854 (PSUS)
becomes "+5.0V ± 0.1V".
PSUS (=GNDH) is a floating GND and the electric potential is different
from that of chassis GND. Be sure not to short-circuit PSUS (=GNDH)
and another GND, because that may damage the unit.

White 100%

signal

VOFS/VH/
VRN/IC5V

Voltage adjustment

Note) Be sure to measure between specified test points.

Sustain Pulse

Waveform

adjustment

White 100%

signal

X-SUS-G, Y-SUS-G adjustment
Set to the indicated value with a key on the remote control unit.
(refer to DRIVE ADJ mode)

X-SUS-B, Y-SUS-B adjustment
1) Set adjustment value to "8", and confirm that green mis-discharging

dots do not appear within 20mm from top & bottom of Screen.

2) When green mis-discharging dots appear, decrease the adjustment

value "1" by "1" until green mis-discharging dots will disappear.
Set the adjustment value when the green disappear.

3) Observe sustain waveform at each Drive Assy, between K3402

(X-PSUS) and K3404 (SUS-GND), and TP3716 (Y-PSUS) and
TP3713 (SUS-GND). Confirm that the waveform is not distorted.

6

7

Procedure

Adjusting Item

Input signal

Adjusting Point

Adjusting Method

DRIVE ADJ mode
in Factory mode
X-SUS-B.…..."1" Key
Y-SUS-B .….."3" Key

The symptom in case of mis-adjustment

Green mis-discharging dots
appear within 20mm from
top & bottom of Screen.

Summary of Contents for PDP-505HD




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands