4
> Before Start
> Part Names
> Install
> Playback
Advanced Setup | Others
Front Panel
Part Names
1.
8
STANDBY/ON button/indicator: Switch the main power of the unit on and off. When
starting up the unit, the indicator in the center of the button lights blue.
2. STANDBY indicator: Lights red when the unit is in standby mode.
3. Disc tray: Place discs here. 8-cm discs can also be used.
4.
;
button: Open or close the disc tray.
5. Play buttons:
u
t
: Return to the beginning of the track being played. Press again to move to the
track before. Press and hold to rewind the track quickly.
q
/
h
: Play or pause play.
y
i
: When pressed during play, move to the next track. Press and hold to fast-
forward through the track.
g
: This button stops playback.
6. Remote control sensor
• The reception range of the remote controller is within a distance of approx. 16´/5 m,
and an angle of 20° in vertical direction and 30° to right and left.
7. CD/SACD button/indicator: Switch between CD/SACD as the source. When playing a
hybrid SACD, the layer being played switches if you press this during play. (
P18)
The indicator lights blue when SACD is selected.
8. DIRECT button/indicator: Switch the DIRECT mode ON and OFF. (
P15)
The indicator lights blue when the DIRECT mode is ON.
9. Display (
P7)
10.SOURCE button: Switches the source to be played.
11. SETUP button: Displays the SETUP menu. (
P16)
6
bk
bl
8
7
9
1
4
3
5
2
