Pioneer MVH-S219BT, Owner'S Manual

Page: 5 / 20

5
En
En
g
lis
h
The RDS (radio data system) function only works in areas that broadcast RDS
signals for FM stations.
The six strongest stations are stored on the number buttons ( 1 / to 6 / ).
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press / to select a station.
Press and hold / then release to seek an available station.
Scanning stops when the unit receives a station. To cancel seek tuning,
press
/ .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 9).
To store stations manually
1
While receiving the station you want to store, press and hold one of the
number buttons (
1 / to 6 / ) until it stops flashing.
1
Press SRC / OFF to select [RADIO].
2
Press BAND / DIMMER to select the band from [F1], [F2], [F3] or [AM].
3
Press a number button ( 1 / to 6 / ).
Radio
Best stations memory (BSM)
Receiving preset stations
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the FUNCTION settings (page 9).
Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android)
1
Open the USB port cover.
2
Plug in the USB.
NOTE
To automatically switch to [USB] source when a USB device is connected to the unit, set
[USB AUTO] to [ON] in the SYSTEM settings (page 10).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device
connected directly to the unit will protrude out from the unit, which could be dangerous.
USB/AUX
Playing back
AUX input jack (3.5 mm stereo jack)
USB port
SRC (source)/OFF
M.C. (multi-control) dial