Pioneer MVH-8200, Operation Manual

Page: 25 / 48

Bluetooth Telephone
This function is available only for MVH-8200BT.
For details on basic operations after connect-
ing to a cellular phone, refer to
Using Blue-
tooth telephone on page 11.
!
PIN code is set to
0000
as the default. You
can change this code. Refer to
PIN Code
(PIN code input) on the next page.
Connection menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Display the phone menu.
Refer to Basic menu operations on page 10.
2 Use M.C. to select Connection.
Turn to change the menu option. Press to se-
lect.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Device List (connecting or disconnecting a cellular
phone from the device list)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the name of a device you want
to connect.
3
Press and hold M.C. to switch the BD address
and device name.
4
Press
M.C.
to connect the selected cellular
phone.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (
MVH-8200BT ) and enter the link code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
Delete Device (deleting a cellular phone from the de-
vice list)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the name of a device you want
to delete.
3
Press M.C. to select the device you want to delete.
Press and hold M.C. to switch the BD address
and device name.
4
Use M.C. to select Yes .
Turn to change the menu option. Press to select.
To cancel, select
No .
!
While this function is in use, do not turn off the
engine.
Add Device (connecting a new cellular phone)
1
Press M.C. to start searching.
!
To cancel, press
M.C.
while searching.
2
Turn M.C. to select a device from the device list.
!
If the desired device is not displayed, select
Search Again .
!
If five devices are already paired, Memory
Full is displayed and it is not possible to per-
form this operation. In this case, delete a
paired device first.
3
Press and hold M.C. to switch the BD address
and device name.
4
Press M.C. to connect the selected cellular
phone.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (
MVH-8200BT
) and enter the link code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
Special Device (setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your Blue-
tooth device is listed as a special device, select the
appropriate one.
1
Press M.C. to display the setting mode.
2
Use M.C. to select a special device.
Turn to change the menu option. Press to select.
3
Use a cellular phone to connect to this unit.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (
MVH-8200BT ) and enter the link code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
!
If five devices are already paired, Memory
Full is displayed and it is not possible to per-
form this operation. In this case, delete a
paired device first.
En
25
Section
03
Operating
this
unit
Operating this unit