Pioneer MEH-P5000, Service Manual

Page: 137 / 141

137
MEH-P5000R
—
,P5000,P5050
+ ≠
+ ≠
Note: Depending on the kind of vehicle, the function of 3* and 5* may be dif
ferent. If this is the
case, be sure to connect 2* to 5* and 4* to 3*.
+ ≠
+ ≠
Use this for connections when you have the separately available amplifier
.
Speaker leads
Rear
Connecting cords with RCA pin plugs (sold separately)
Cap (1*) When not using this terminal, do not remove the cap.
ISO connector
System remote control
Rear output
Fuse holder
1*
2* 4*
3* 5*
White/yellow
Antenna jack
Y
ellow (2*)
T
o
terminal always supplied
with power regardless of ignition switch position. Red (4*) T
o
electric terminal controlled
by ignition switch (12
V
DC)
ON/OFF
.
Y
ellow (3*)
Back-up (or accessory)
Red (5*) Accessory (or back-up)
Black (ground) T
o
vehicle (metal) body.
Orange T
o
lighting switch terminal.
Blue/white T
o
Auto-antenna relay control terminal.
(Max. 300 mA 12 V DC.)
Connect leads of the same color to each other
.
Note: In some vehicles, the ISO connector may be divided into two. If this is the case, be sure to connect to both connectors.
See the section “RFP
Alert
Installation”.
Power amp (sold separately)
Blue/white T
o
system control terminal of
the power amp. (Max. 300 mA 12 V DC.)
Rear
White White/black Gray Gray/black Green Green/black V
iolet
V
iolet/black
: Front left
+
: Front left
≠
: Front right
+
: Front right
≠
: Rear left
+
: Rear left
≠
: Rear right
+
: Rear right
≠
Left speaker
Right speaker
Multi-CD player (sold separately)
IP-BUS input (Blue)
IP-BUS cable
This Product
Front
Front
System remote control
Power amp (sold separately)
Front output
Y
ello
w/black
If you use a cellular telephone, connect it via the
Audio
Mute lead on the cellular telephone. If not, keep the
Audio
Mute lead free of an
y connections.
-
MEH-P5000R
—
/EW