Pioneer MEH-P5000, Service Manual

Page: 102 / 141

102
MEH-P5000R
—
,P5000,P5050
RIGHT
: Continuous play menu
: Continuous play menu
: Continuous play (pit part)
: Continuous play (groove part)
#### : Address
: Continuous play (pit part)
: Continuous play (groove part)
#### : Address
: Continuous play (pit part)
: Continuous play (groove part)
#### : Address
: B-ATT (Focus) setting of high reflection pit part
: B-ATT (Focus) setting of low reflection pit part
___
: ATT setting value
• When you start continuous play with the position which is picked up.
SUBQ ####
ADIP ####
SUBQ ####
ADIP ####
TESTPLAY
TESTPLAY
ADRS0050
"F" key in the main unit
"
'
" key in the main unit
"F" key in the main unit
: Specify the address from which you start playing.
• When you start continuous play with any address.
SUBQ ####
ADIP ####
* Pressing "SCR" key in the main unit in each status switches to "TEST STOP" status.
* Pressing "
" key in the main unit in the status where you specified the address to start
playing switches the digit of the address that will be changed.
* Pressing " ' " key in the main unit in the status where you specified the address
to start playing switches the digit of the address as shown below.
0050H
(Initial value)
03C0H
0700H 08A0H
ADRS0050 ADRS03C0 ADRS0700
The first digit
(Initial value)
The second digit
The third digit
ADRS0050 ADRS0050 ADRS0050
ADRS08A0
* Pressing RIGHT/LEFT key in each the status where you specified the address to start playing
switches the value in the digit you selected in the range from 0
H
through F
H
.
* Pressing " ' " key in the main unit in the continuous play status switches to the B-ATT
setting status in the ATT manual tuning.
HBT
___
LBT
___
" " key in the
main unit " " key in the
main unit
" " key in the main unit
" ' " key in the
main unit
" ' " key in the
main unit
"
'
" key in the main unit
" " key in the
main unit
' ' '
'
'
-
Continuous play